EIM Plus Engine Interface Module, Overspeed Monitoring, Engine Speed Adjustment, Sturdy Sealed Design, LED Indicators, for Engine Performance Management

Features:The Engine Interface Module is a sealed, engine mounted module that provides switching relays for the Starter Motor Solenoid, Glow Plug and Fuel Solenoid. Each of these circuits is protected with individual s mounted in the module. Individual LED's illuminate when each circuit is energised. There are two versions of the Engine Interface Module available: EIM Basic: The ElM is utilised in conjunction with control panels equipped with overspeed shutdown. EIM Plus: The ElIM plus is used in conjunction with control panels not equipped with overspeed shutdown. Overspeed Signal (EIM Plus only) The ElM Plus monitors the speed signal from the magnetic pick-up. If the engine speed rises above a certain pre-setable value, the module sends a zero volt signal to the generator set control panel to activate the Overspeed Fault circuitry. The Overspeed Set Point is factory set at 55 Hz for 50 Hz sets and 66 Hz for 60 Hz sets. This can be adjusted using the adjustment screw accessed through the hole beside the Overspeed Set-up LED. While the engine is running at the rated speed (1500 rpm for 50 Hz or 1800rpm for 60 Hz) the adjustment screw should be adjusted until the Overspeed Set-up LED just goes out. This sets the overspeed value at 10% above the speed at which the generator set is operating.Specification:Condition: brand newItem: 630-645Voltage: 12V DCModel: EIM PLUS Type: 859767Package List:1 * Engine Interface Module

• Efficient Engine Control: The EIM Plus 630-465 Engine Interface Module the Starter Motor Solenoid, Glow Plug, and Fuel Solenoid with individual protection for best, easy Usage.
• Best Overspeed Monitoring: Built-in Overspeed Signal feature (EIM Plus version) helps prevent engine damage by sending a zero-volt signal to activate Overspeed Fault circuitry if RPM exceeds preset limits.
• Seamless Engine Speed Adjustment: Factory-set Overspeed at 55 Hz (50 Hz sets) or 66 Hz (60 Hz sets) with easy adjustment via a screw, ensuring optimal engine performance for safe, efficient .
• Sturdy & Sealed Design: Engineered for tough environments, the EIM Plus module is sealed and mounted on the engine, ensuring protection from external elements for long-lasting durability.
• Easy-to-Use Indicators: Equipped with LED indicators for real-time monitoring of circuit statuses (Starter Motor, Glow Plug, Fuel Solenoid), providing instant feedback for effortless maintenance.