Sherline 4500A - 3.5" x 8" Lathe with "Zero" Adjustable Handwheels

The model 4500 (4530) lathe is a standard model 4000 (4100) 3.5” x 8” lathe upgraded to include two adjustable “zero” handwheels on the crosslide and leadscrew. (Standard handwheel on tailstock.) The lathe includes the motor and its speed controller, a 2.75" (70mm) x 6.0" (152mm) crosslide, 15" (381mm) steel bed to allow 8" (203mm) between centers, pulleys, belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet. This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned over the bed. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed. Includes: 1041 2.5" 3-jaw self-centering chuck 1072 1/4" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt

• Allows the user to reset the handwheel to a zero reading at any time without moving the leadscrew
• 3.5" x 8" Lathe with "Zero" Adjustable Handwheels
• Spindle speed range: 70-2800 RPM continuously variable by electronic speed control
• Speed Control:Electronic- voltage from 100VAC to 240VAC, 50 or 60Hz, converts to 90VDC for motor
• Made In the USA